Sell Test Equipment

RM3J50+1FA7 JDSU Fiber Optic Equipment

Used
$495.00

The RM3J50+1FA7 is fiber optic equipment from JDSU.

In Stock

Additional Features:

  • Wide wavelength range
  • Insertion loss and backreflection capability
  • Typical backreflection power sensitivity of - 75 dB
  • Insertion loss and power measurements to - 80 dBm
  • Convenient foot pedal for data logging
  • Multiple connector test system (MCTS) application software
  • Direct display of measured backreflection, power, or insertion loss
  • Compensation for extraneous backreflection for accurate backreflection measurements
  • Calibration can be verified using calibrated reference jumpers
  • User-calibration mode
  • Transit case for safer and easier portability
  • CE compliant

Specifications:

  • Operating wavelengths: 1490/1625 ± 10 nm
  • Backreflection range: 0 to-75 dB
  • Relative accuracy backreflection: ± 0.4 dB2
  • Detector type: 2 mm InGaAs
  • Absolute power accuracy: ± 0.25 dB (typical) at - 10 dB4, 5
  • Relative accuracy power: ± 0.05 dB (< 5 dB loss), ± 0.15 dB (> 5 dB loss)4
  • Remote interface: RS232 (GPIB optional)
  • Input voltage: 100-240 V AC, 50-60 Hz
  • Power consumption: 25 VA maximum
  • Display: 16 character LCD
  • Dimensions (W x H x D):26 x 11 x 26 cm
  • Operating temperature: 0 to 40 °C
  • Storage temperature: - 40 to 70 °C
  • Humidity: Maximum 95% RH from 0 to 40 °C

Safety Information

  • Complies to FDA 21CFR 1040.10 for Class I Lasers

Applications

  • Connector backreflection/loss testing
  • Component testing
  • Installation verification
  • Quality assurance (QA) acceptance testing

The JDS Uniphase RM3J50+1FA7 Backreflection Meter is a portable, directdisplay instrument used for the convenient measurement of backreflection, insertion loss, and power of connectors, components, and systems. With a single output port, the meter is ideal for jumper manufacturers.

The use of an FC/APC ultra-low backreflection connector on the output port enables the use of hybrid jumpers to accommodate measurements with various connector types without compromising the backreflection measurement range. When a device under test (DUT) is connected to the jumper and the DUT output is terminated, the backreflection of the DUT is displayed. The meter's superior optics are very stable at low backreflection levels. Insertion loss and power can be measured to - 80 dBm.

ValueTronics New and Used Test Equipment, All Rights Reserved