Sell Test Equipment

SA-606F2 NF Corporation Amplifier

New

The SA-606F2 is an Amplifier from NF Corporation. An amplifier is a type of electronic test equipment that amplifies radiofrequency (RF) and microwave signals using the antenna. Amplifiers are ideal when used for electromagnetic interference (EMI) testing, cell phones, microwaves, radio communications, and other such applications.

Features:

  • Gain (V/A): 1 G
  • Frequency Response: DC to 100 kHz
  • Equivalent Inpug Noise Current Density: 6 fA/√Hz (typ.)

Input Section

  • Input type: DC coupling unbalanced, single-ended input, SMA connector
  • Maximum input current: ±10 nA
  • Input impedance: 10 kΩ
  • Recommended signal source resistance: 100 MΩ or more
  • Input bias current: 1 pA (typ.) 
  • Equivalent input noise current density: 6 fA/√Hz (typ.)

Output Section

  • Output type: DC coupling unbalanced, single-ended output, SMA connector
  • Maximum output voltage: ±10 V
  • Maximum output current: ±5 mA
  • Output impedance: 50 Ω±10%
  • Output offset voltage: ±5 mV
  • Output offset voltage adjustment range: ±15 mV (adjusting with a variable resistor)

Amplification Section

  • Gain (V/A): 1×109 (1 G) ±1%
  • Output gain flatness (when setting fc 0, within ±0.5 dB): DC to 10 kHz
  • 0.5, -3 dB Frequency response (Cs=10 pF): DC to 100 kHz
  • Polarity: Non-inverting
  • Low pass filter output (Cut-off frequency setting): 3 kHz / 10 kHz / 30 kHz / THRU, selctable with a switch

Others

  • Power connector: HR10-7R-4P (73) connector
  • Operating power supply voltage range: ±15 V ±1 V
  • Quiescent current: ±40 mA or less, ±32 mA (typ.) 
  • RoHS: Directive 2011/65/EU
  • EMC: EN 61326-1: 2015
  • Dimensions (mm): 76 (W) × 50 (D) × 21.1 (H) (not including bottom plate and protrusions)
  • Performance guarantee temperature range: 23° C ±5° C

Temperature and humidity range

  • Operation: 0°C to 40°C 5 % to 85 % RH (absolute humidity 1 g/m3 to 25 g/m3, non-condensation)
  • Storage: -10° to 50°C 5 % to 95 % RH (absolute humidity 1 g/m3 to 29 g/m3, non-condensation)

The NF Corp SA-600 Series is a wideband current amplifier (current to voltage converter) with a high gain and wide frequency band.

The SA-606F2 operates stably for the added input capacitance despite a wide frequency band. It operates without oscillation with an added input capacitance of 1000 pF. The LPF cutoff frequency can be selected from four steps with a switch.

The image is a representation of selection. See specifications for product details.

ValueTronics New and Used Test Equipment, All Rights Reserved