SLH-60-240-1800 Sorensen DC Electronic Load

Additional Features:

• 60V / 240A / 1800W rack mounted, programmable DC load
• Fully programmable, high power AC/DC or DC electronic loads
• High current, 60V DC models for general purpose power supply testing
• Flexible Control
• Flexible Data Feedback
• GPIB, RS-232, Analog
• Dynamic mode with slew rate control
• Remote: GPIB, RS-232, Analog (DC only)
• DC Modes: CC, CR, CV, CP
• AC Modes: CR, CC with crest factor control
• Dynamic mode with slew rate control
• Flexible Data Feedback

Flexible Product Line

• Low power DC modules
• Low power AC / DC modules
• High power DC modules
• Stand along modules

Specifications:

Input Ratings

• Voltage: 60 V
• Current: 240 A
• Power: 1800 W
• Minimum Voltage (Full Current): 0.5V @ 240A

CC Mode

• Range: 0-24 / 0-240A
• Resolution: 6.4 / 64mA
• Accuracy: ±0.2% OF (SETTING + RANGE)

CR Mode

• Range 1 (I>0.05% of rating): 0.25 - 937.50Ω
• Range 2 (I>0.5% of rating): 0.0133 - 0.25Ω

CV Mode

• Range: 0 60V
• Resolution: 0.016V
• Accuracy: ±0.1% OF (SETTING + RANGE)

CP Mode

• Range: 0-1800W
• Resolution: 0.48W
• Accuracy: ±0.5% OF (SETTING + RANGE)

Short Mode

• Maximum Resistance: 2.1mΩ
• Current: 240A

Dynamic Mode

• T High / T Low: 50μs to 9.999s
• Slew Rate Low: 16mA - 1A/μs
• Slew Rate High: 0.160A - 10A/μs
• Accuracy: ± (10% OF SETTING +10μs)

4 1/2 DVM

• Range: 0 - 20.00 / 60.00V
• Resolution: 0.001 / 0.01V
• Accuracy: ±0.05% OF (READING + RANGE)

4 1/2 DAM

• Range: 0 - 24A / 0 - 240A
• Resolution: 1mA / 10mA
• Accuracy: ±0.5% OF (READING + RANGE)

Current Monitor

• 24A/V

Load ON Volt

• Range: 0.1 - 25V
• Resolution: 0.1V
• Accuracy: 1% of SETTING +0.25V

Load OFF Volt

• Range: 0 - 25V
• Resolution: 0.1V
• Accuracy: 1% of SETTING +0.25V

General

• Software: LabVIEW Driver can be downloaded at no cost: www.elgar.com/products/SL/SL_Downloads.htm
• Regulatory: Certified to UL/CSA 61010 and IEC/EN 61010-1, CE Compliant (LVD and EMC Directives)
• Environmental: Operating Temperature: 0° to 40°C; Storage Temperature: -10° to 65°C
• Cooling: Front, Side, Top Air Inlets, Rear Exhaust, Units may be rackmounted without spacing.
• SLH Memory: 150 Settings for DC, 5 Settings for AC
• Readback: Voltage, Current, Power: 16-bit resolution, VA: Vrms x Arms
• Analog Input: SLH: BNC connector. DC, Single Input (SLH or SLM), CC Mode: 0-10V = 0 – FS, Bandwidth: 20kHz, Sums Current with Programmed Value (Analog programming not available on AC/DC modules.)
• Remote Programming: RS-232C, GPIB, analog - not available on AC/DC modules
• Input Power Line: 115V / 230V ± 10%, switch selectable or 100V / 200V ± 10% switch selectable (optional)
• Frequency: 50 / 60Hz
• Power Consumption: 100W Maximum

The Sorensen SLH-60-240-1800 is a Fully programmable, high power DC electronic load. The SLH-60-240-1800 is a High current, 60V DC model for general purpose power supply testing.

The image is a representation of selection. See specifications for product details.