ZUP36-24 Lambda DC Power Supply

Additional Features:

• Constant Voltage/Constant Current
• Built-in RS-232 & RS-485 Interface
• An embedded Microprocessor controller
• Digital Encoder Knob
• Software Calibration
• Last Setting Memory
• Parallel Operation (Master/Slave) Active Current Sharing
• External Voltage or Resistance Programming
• Active Power Factor Correction: 99%
• 85~265Vac Universal Input Voltage
• 19" Rack Mounted ATE and OEM
• Worldwide Safety Agency Approvals
• CE Mark for LVD and EMC Regulation

Applications

• Industrial
• Test

Specifications:

• Output Voltage Range: 0-36 V
• Output Current Range: 0-24 A
• Maximum Power: 864 W
• Ripple 5 Hz-1 MHz: 5 mV
• Noise 20 MHz BW: 70 mV
• Ripple 5 Hz-1 MHz: 30 mA
• Efficiency (100/200 VAC): 80/84 %
• Load Regulation: 2mV + 0.005% over 0 - 100% load change
• Line Regulation: 1mV + 0.005% over 85 - 132 or 170 - 265VAC line change
• Recovery Time: 0.2ms
• Temperature Coefficient: 30ppm/°C following 30 minute warm up
• Temperature Drift: 0.01% + 2mV change in output
• Up programming response time: 50 - 60ms 
• Down programming response time (CV): 50ms
• Load Regulation: 0.07% + 10mA on 800W models
• Line Regulation: 0.01% + 5mA on 800W models
• Temperature Coefficient: 100ppm/°C from rated current after 30 minute warm up time
• Temperature Drift: 0.05% + 10mA 800W models 
• Prog Voltage resolution: Better than 0.028% of rated voltage
• Prog Voltage accuracy:  .02%+20mV
• Prog Current resolution: Better than 0.03% of rated output current
• Prog Current accuracy: 0.4% + 40mA
• Overvoltage Shutdown: 0-40
• Thermal Protection: Over temperature protected
• Display - Voltage: 3 digits
• Display - Status: CV / CC, Alarm, Foldback, Local/Remote, On/Off
• Remote On/Off: TTL signal or dry contact relay
• Output Good: Open Collector
• Voltage & Current Programming: By either Voltage (0-4V) or Resistance (0-4k)
• Remote Sense: Up to 0.5V compensation per output cable
• Communication Interface: RS232 & RS485 standard, IEEE488 optional
• Series & Parallel Operation: Series: Up to two units; Parallel: Up to five units in master-slave configuration
• AC Input Voltage range: 85-265VAC (47-63Hz)
• Inrush Current (100/200VAC): 30A
• Hold Up Time (Typ) at 100VAC: 20 ms
• Power Factor Correction: Complies with EN61000-3 Class A (0.99 typ)
• Temperature Range: Operating: 0 - 50°C; Storage: -20 to +70°C
• Humidity (non condensing): Operating: 30 - 90% RH, Storage 10 - 95%RH
• Cooling: Internal fan
• Withstand Voltage: Input to Ground 2kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min
• Isolation Resistance: >100M at 25°C & 70% RH
• Vibration & Shock (non-op.): Vibration:10-55 Hz(1 min.) 2G constant X, Y, Z, when correctly mounted; Shock: <20G
• Safety Agency Approvals: UL3111-1, EN61010-1, CE Mark
• Conducted & Radiated EMI: EN55022-B conducted, A radiated, FCC Class B conducted, A radiated, VCCI-2 conducted, -1 radiated

The TDK Lambda ZUP36-24 is a 0-36 V, 0-24 A Zero up programmable DC Power Supply with an output power of 864 Watts. The ZUP36-24 is perfect for Industrial and Test applications.