2230-30-6 Keithley DC Power Supply

Features:

• Three Channel High Power Programmable DC Power Supply
• 375 W, two 30 V, 6 A channels, one 5 V, 3 A channel
• All channels are independently controlled and are isolated to power a wide range of test setups
• All channels have remote sensing so the programmed voltage is accurately applied to the load
• Set and monitor output voltages with 0.03% basic accuracy and 1 mV resolution
• Monitor load current with 0.1% basic accuracy and 1 mA resolution
• Low noise, linear regulation with <1 mV rms ripple and noise
• Combine channels in series to output as high as 60 V and in parallel with two or three channels to create capacity as high as 15 A
• Voltage and current outputs of three channels are displayed simultaneously for immediate observation of each output state
• USB and RS-232 interfaces and rear panel connections for automated test convenience

The Keithley Instruments 2230-30-6 3-channel programmable power supplies provides 375 W of power in a space-saving 2U high, half-rack width enclosure to power automotive circuits, LED drivers, power supplies, power ICs, and other highpower circuits. The 2230-30-6 offers 375 W with two 30 V, 6 A channels and one 5 V, 3 A Channel.

The 2230 Series supplies are linear power supplies; thus,they are low noise supplies to have minimal impact on a device-under-test (DUT). Each channel has a rectangular output characteristic to enable obtaining the full current at the maximum voltage so that the 2230-30-6 can supply 30 V to a 6 A load.

Control Noise with Independent Outputs

The 2230 power supplies can power circuits that are optically isolated or transformer-isolated from each other and have different reference points. The isolated channels eliminate the need for a second power supply for powering one of the isolated circuits. Additionally, each channel can be independently controlled and turned on or off at any time; control over each individual channel minimizes noise in the circuit.

Be Confidant in your Outputs

Each 2230 channel offers 0.03% basic voltage accuracy and 1 mV resolution setting and measurement, ensuring that the programmed output is accurately applied to the output terminals. Plus, using remote sense leads for each channel compensates for and overcomes voltage drops due to resistances in the test leads, assuring that the programmed voltage is applied to the load.

Automation Made Easy

USB and RS-232 interfaces enable complete control of the 2230 power supplies from a PC. LabView and IVI drivers facilitate instrument control, data logging, and analysis. Series 2230 power supplies can be controlled in either a semi-automated or full-automated test system with these drivers or software packages such as MatLab.