Features:
- Rated Output Power: 250 watts minimum
- Input For Rated Output: 1.0 mW Max
- Power Output @ 3dB Compression: Nominal: 300 watts, Minimum: 250 watts
- Power Output @ 1dB Compression: Nominal: 250 watts, Minimum: 200 watts
- FLATNESS: ±1.5 dB maximum, ±1.0 dB typical
- Frequency Response: 80-1000 MHz instantaneously
- Gain (at maximum setting): 54 dB minimum
- Gain Adjustment (Continuous Range) : 25 dB minimum (4096 steps remote)
- Input Impedance: 50 ohms, VSWR 1.5:1 maximum; 1.3:1 typical
- Output Impedance: 50 ohms nominal
- Mismatch Tolerance: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
- Modulation Capability: Faithfully reproduces AM, FM, or Pulse modulation appearing on input signal.
- Harmonic Distortion: Minus 20 dBc maximum at 200 watts, -20dBc typical @ 250 watts
- Third Order Intercept Point: 62 dBm typical
- Noise Figure: 8 dB maximum, 6 dB typical
- Primary Power (user must specify):120-240 VAC, 50/60Hz, single phase, 1000 watts maximum
- Connectors: RF See Model Configurations-Forward Sample: BNC female, front (-46 dBc) Reverse sample: BNC female, front (-46 dBc)
- Remote Interfaces: IEEE-488 24 pin female, RS-232 9 pin Subminiature D (female), Fiber Optic ST Conn Tx and Rx RS-232, USB 2.0 Type B, Ethernet RJ-45
- Safety Interlock: 15 pin Subminiature D
- Cooling: Forced air (self contained fans)
- Export Classification: EAR99
The Model 250W1000B is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability. The Model 250W1000B, when used with a sweep generator, will provide a minimum of 250 watts of RF power. The Model 250W1000B is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability. The display provides operational presentation of Forward Power and Reflected Power plus amplifier status.
Manufacturer | Amplifier Research |
---|---|
Condition | Used |
Power | 250 W |
Frequency | 1 GHz |