2574R Xitron Analyzer

Special Price
Regular Price
Free Shipping


The XiTron 2574R is a four-tube ballast analyzer that has been adopted by ballast/lighting manufacturers worldwide because of their greatly enhanced technological capabilities, greatly reduced setup and maintenance requirements, and low cost of ownership. With the 2574R, four tubes and four ballasts can be tested in a fraction of a second for every key parameter, including peak inrush, striking and light efficiency (when used with a light monitor). With a capacity of 2,000 measurements per second on each of up to 30 signals, the only limitation to testing throughput is the speed of your production line.

Ballast Analyzer

  • Four-tube ballast analyzer
  • Up to 2 MSPS continuous sampling
  • Completely tests a ballast in less than 100 ms
  • Fully automatic ballast start-up and tube striking detection

Stand-alone or Computer-controlled

The 2574R can be used in stand-alone or computer-controlled environments. It allows the user to simultaneously measure all pins on all tubes, independent output measurements, 12 voltages and 12 currents, (i.e. independent tube V and I measurement, independent filament V and I, for each tube that is configured). A continuous sampling at up to 2 Msps ensures that even the shortest transient events are measured.


More Information
1MEG-INPUTOption 1 MEG input impedance upgrade, per channel cost (requires a calibration cost as well if not performed as part of a repair) (1, 2, 3 & 4 Channel)
2XExtra High Current Load Capability (12Apk per pin) (1, 2, 3 & 4 Channel)
CBL00672 Pin, Molex to Flying Leads, 7" each
FDecrease to 2MHz –3dB bandwidth, reduced accuracy above 100kHz
HC3Apk, 2Arms per pin. (HID becomes 6Apk combined)
HI4.5kVpk (removes spark gaps)
HIDOption HID (1, 2, 3 & 4 Channel)
HLIncreases line current to 40Apk
LC0.75Apk per pin
MIncreased Voltage Accuracy to 1.5kVpk limit, better accuracy
PCA00882574R Rear Panel PCA
XC6Apk per pin
Looking for other manuals? Search all of our available manuals here.