Additional Features:
- Power output: cw up to 100 Watts
- Minimum: 50 Watts
- Power output, cw linear (less than 1 dB compression into 50 ohms)
- Flatness: ±2.0 dB maximum; ±1.5 dB typical
- Frequency response (instantaneous): 1 to 1000 MHz
- Input for rated output: 1.0 milliwatt max
- Power gain: 47 dB minimum
- Input Impedance: 50 ohms; VSWR 2:1 max
- Output impedance: 50 ohms nominal
- Mismatch tolerance: 100%
- Modulation capability: 100%
- Harmonic distortion: Minus 20 dBc max, at 40 watts
- Third-order Intercept point: 58 dBm typical
- Primary power (select via internal taps): 100/110/120/200/2081220/240 Vac ±5%, 50/60 Hz, single-phase, 1900 W max
- RF Connectors: Type N female
- Cooling: Forced air (self-contained fans)
The Amplifier Research 50W1000 is a self-contained ultra-broadband solid-state amplifier that provides linear operation over the spectrum from 100 kHz to 1000 MHz. The 50W1000 is rated at 50 Watts, and features instantaneous bandwidth, flat output, and immunity to even worst case load mismatch including shorted or open cable without damage or system shutdown.
| Manufacturer | Amplifier Research |
|---|---|
| Condition | Used |
| Power | 50 W |
| Frequency | 1 GHz |
| AS-IS | Unit is out of tolerance. Flatness is 14.6 at 0dBm or -5dBm input (spec. 4dB). Output at 1db compression (-5dBm input) is only 3.2W at 730MHz (93W at 16MHz), spec is >40W. Output at rated input of 0dBm is only 5.5W at 1GHz (158 at 6MHz), spec is >40W |
|---|
Looking for other manuals? Search all of our available manuals here.