Additional Features:
- DC Voltage Range: 0 to ±1020V
- DC Current Range: 0 to ±11A
- Resistance Range: 0 to 329.999 MΩ
- AC Voltage Range: 1 mV to 1020V
- AC Current Range: 29 mA to 11A
- Capacitance Range: 0.33 nF to 1.1 mF
- DC Power Range: 109 mW to 11 kW
- AC Power Range: 109 mW to 11 kW
- Phase Power Range: 0 to ± 179.99°
- Frequency Range: 0.01 Hz to 2.0 MHz
These calibrators were designed to cover a very wide range of medium accuracy electrical measurement devices including:
- Handheld and bench multimeters
- Oscilloscopes
- Wattmeters
- Analog,volt/ohm/amp/watt instruments
- Electronic thermometers
- Data loggers
- Strip chart recorders
- Power harmonics analyzers
- Process calibrators
- Current clamps and related instruments
The Fluke 5500A is a revolutionary product that addresses a wide cross-section of your electrical calibration work load. It sources direct voltage and current, alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current, and simulates power with phase control, resistance, capacitance, thermocouples, and RTDs. The Oscilloscope Calibration options of the 5500A provide level sine wave, fast edge, time mark, and amplitude signals for calibration of oscilloscopes up to 600 MHz.
| Manufacturer | Fluke |
|---|---|
| Condition | Used |
| PQ | Power Quality Option |
|---|---|
| SC600 | 600 MHz/300 ps Oscilloscope Calibration Option |
- Fluke 5500A Getting Started
- Fluke 5500A Operator Manual
- Fluke 5500A Operator Reference Guide
- Fluke 5500A Programmer Reference Guide
- Fluke 5500A Service Manual
Looking for other manuals? Search all of our available manuals here.