Features
- Key valve testing functions - valve signature test, speed test, step test, manual test, bump/partial stroke test
- Key mA loop calibrator functions - mA source, mA simulate, mA read, mA read/loop power, and volts read
- ValveTrack™ software - enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory
- Valve test procedures that deliver Good, Marginal or Bad assessment of a control valve
- Generic HART communication
- Best-in-class mA accuracy at 0.01% measurement or source value
- Compact rugged design
- Intuitive user interface with Quick-Set knob for fast setup, easy to use
- 24 V DC loop power with mA measure mode (-25 to 125%)
- Resolution of 1 μA on mA ranges and 1 mV on voltages ranges
- Built in selectable 250 Ω resistor for HART communications
- Simple two wire connection for all measurements
- Auto shutdown to conserve battery life
- Variable step and ramp time in seconds
Accessories (Included)
- mA Loop Valve Tester
- Stackable Test Lead Set
- Extended Tooth Alligator Clip Set
- Test Probes
- SureGrip™ Hook Clips
- Lemo to USB Upload/Download Cable
- ValveTrack™ Software
- 6 x AAA Batteries (Installed)
- Softcase
- Product Manual CD-ROM
- Quick Reference Guide
- Safety Information
Application
- Oil and gas
- Food and beverage
- Waste/wastewater
- Pharmaceuticals
- Process automation
Specifications
- Functions: mA source, mA simulate, mA read, mA read/loop power, and volts read
- Ranges: mA (0 to 24 mA) and Volts (0 to 30 V dc)
- Resolution: 1uA on mA ranges and 1mV on voltage range
- Accuracy: 0.01% ±2 counts all ranges (@ 73.4°F ±41°F [23°C ±5°C])
- Operating Temperature Range: 14 to 131°F (-10 to 55°C)
- Humidity Range: 10 to 95% non-condensing
- Stability: 20 ppm of F.S./°C from -10 to 18°C and 28 to 55°C
- Display: 128 x 64 pixels, LCD graphic w/backlight, .34 in high digits
- Power: 6 x AAA alkaline
- Battery Life: ≥40 hours continuous use (measure mode using alkaline)
- Loop Compliance Voltage: 24 V dc @ 20 mA
- Voltage Protection: 240 V ac
- Overload Current Protection: 28 mA dc
- EMC: EN61326 Annex A (portable instruments)
- Dimensions: 6 x 3.6 x 1.3" (15 x 9 x 3 cm)
- Weight: 0.3 kg (9.5 oz)
- Warranty: Three year
The 710 is a valve tester from Fluke. Designed to enable users to perform quick, easy tests on HART smart control valves. Features built-in test procedures and an intuitive user interface that allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics helps you make maintenance decisions faster than ever.
| Manufacturer | Fluke |
|---|---|
| Condition | New |
No manuals are currently available. Search all of our available manuals here.