Additional Features:
- Frequency range: 20 Hz-40 GHz
- Spectrum analysis with ultra-wide dynamic range
- Refresh rate, quasi-analog 25 sweeps/s
- Displayed noise floor: –150 dBm (typ.) in 10-Hz bandwidth
- 3rd-order intercept point: +20 dBm typ.
- 1 dB compression point of RF input +10 dBm
- Sweep time: Span = 0 Hz - 1 µs to 2500 s in 5% steps; Span ≥10 Hz - 5 ms to 16 000 s in steps ≤10% ;Error limit <1%
- Sampling rate: 50 ns (20 MHz A/D converter)
- Number of pixels:500
- AF demodulation types: AM and FM
The Rohde & Schwarz FSEK30 Spectrum Analyzer comes with low phase noise and OCXO, 1 Hz resolution bandwidth and an FFT filter. The FSEK30 is outstanding for its extremely low noise floor without any impairment to the dynamic range at large signal levels. This can be seen, for example, from the 1 dB compression point of +10 dBm, which yields a dynamic range of 109 dB even at a resolution bandwidth of 1 MHz, allowing GSM, DECT and EDGE power ramps to be determined.
Manufacturer | Rohde & Schwarz |
---|---|
Condition | Used |
Frequency | 40 GHz |
B15 | Controller |
---|---|
B16 | Ethernet Interface |
B17 | 2nd IEC/IEEE-Bus Interface for FSE |
B21 | External Mixer |
B22 | INCREASED LEVEL ACCURACY TO 2GHZ |
B23 | BROADBAND OUTPUT 741.4MHZ |
B4 | Low Phase Noise and OCXO |
B5 | FFT Filter |
B7 | Vector Signal Analyzer |
B8 | TRACKING GENERATOR 3.5GHZ |
B9 | Tracking Generator with I/Q Modulator |
Looking for other manuals? Search all of our available manuals here.