GPP-6030 Instek DC Power Supply

Features:

Does not have GPIB interface

• CH1, CH2: 0-60V/0-3A
• CH3: 1.8V, 2.5V, 3.3V, 5V / 5A
• Load function capability (CC, CV, CR mode)
• Output on/off switch for each channel
• Setting resolution: 2mV / 0.1mA; Read back resolution: 0.1mV / 0.1mA
• Over voltage, over current, and over temperature protection
• Track series and parallel function without additional external wiring
• 385W max output
• 4.3 inch TFT LCD

3CH DC Power Supply (CH1 and CH2: 0-60V/0-3A, CH3: 1.8V, 2.5V, 3.3V, 5V/ 5A)

GPP-3060 and GPP-6030 three-channel programmable DC power supplies are extension models of the GPP-X323 series. The maximum output power of these two models is 385W. GPP-3060 supports CH1/CH2: 0 ~ 30V / 0 ~ 6A output; GPP-6030 supports CH1/CH2: 0 ~ 60V / 0 ~ 3A output; CH3 of both models supports 1.8V, 2.5V, 3.3V, 5.0V/5A.

GPP-3060 and GPP-6030 inherit the high program resolution (1mV/0.1mA) and read back resolution (0.1mV/0.1mA) of the GPP series with low-ripple noise characteristics ?1mVrms/?2mArms and ?100µs output transient recovery ability. An independent output on-off switch is provided for each channel.

The unique load function of the GPP series can arbitrarily set CH1/CH2 as power supply or load function. For example, one channel is set as power output, and the other channel is set as load function to consume the power of the DUT to satisfy simple battery charging and discharging or load characteristic test by a single power supply.