HA1600A USA Thurlby Thandar Instruments Analyzer

Features:

• USA Socket
• Measures power, voltage, current, phase angle etc.
• Tabular and histogram display of harmonics
• Voltage and current waveform displays
• Continuous analysis with real-time graphical update
• Compliance quality measurements to EN61000-3-2/-3
• Wide range of national power connectors available
• Parallel printer and RS232 and USB interfaces
• PC control and documentation software supplied

Specifications:

MAINS ANALYSER

• Measurement Circuit: Single Phase with standard mains connector
• Current Rating: 16A rms continuous, or national connector rating if lower.
• Voltage Ranges: 115V (±200V pk) 230V (±400V pk).
• Current Ranges: ±24mA pk to ±400A pk in fifteen 2:1 ranges.
• Frequency Range: 43 - 67 Hz.
• Shunt Resistance: 3m?.
• Sampling Rate: 300 points per cycle.
• Basic Accuracy: Better than 0.2% ±1mA, up to 16A.
• Measured Parameters: Vrms, Vpk, Arms, Apk, Crest factors, THD, W, VA, Power factor, Frequency, Inrush current.

HARMONICS ANALYSER

• Measurements: 1st harmonic to 40th harmonic.
• Current Rating: 16A rms continuous, or national connector rating if lower.
• Voltage Ranges: 115V (±200V pk) 230V (±400V pk).
• Current Ranges: ±24mA pk to ±400A pk in fifteen 2:1 ranges.
• Frequency Range: 43 - 67 Hz.
• Shunt Resistance: 3m?.
• Transforms Window: Continuous 4, 10, 12 or 16 cycle Discrete Fourier Transforms.

VOLTAGE FLUCTUATIONS & FLICKER METER

• Measurements: Voltage fluctuations dmax, dc, d(t) and flicker Pst and Plt to EN61000-3-3 and EN61000-4-5
• Current Rating: 16A rms continuous, or national connector rating if lower.
• Voltage Ranges: 115V (±200V pk) 230V (±400V pk).
• Fluctuation Range: 25% max. (relative to nominal voltage)

The HA1600A USA is a analyzer from Thurlby Thandar Instruments. The HA1600A is a fast, easy to use mains and harmonics analyser with a large and high resolution graphical display, capable of continuous real-time analysis. The HA1600A is intended primarily as a dedicated harmonics and flicker analyser for compliance quality measurements, but it can also be used as a general purpose mains analyser.