I30 Fluke Clamp Meter

New
Special Price $539.99 Regular Price $599.99
The I30 is a 300 V, 30 A clamp meter from Fluke.
Free Shipping

Additional Features:

Electrical Specifications

  • Specified current range: 30 mA to 30 A DC, 30 mA to 20 A AC rms
  • Usable current range: 5 mA to 30 A DC, 30 mA to 20 A AC rms
  • Crest Factor: 1.4 in
  • Output sensitivity: 100 mV/A
  • Accuracy (at +25°C): ±1% of reading ±2 mA
  • Resolution: ±1 mA
  • Load impedance: > 10 k Ohms and ≤ 100pF
  • Conductor position sensitivity: ±1% relative to center reading
  • Frequency range: DC to 20 kHz (-0.5 dB)
  • di/dt following: 20 A/µs 
  • Response time: Better than 1 µs 
  • Temperature coefficient: ±0.01% of reading/°C
  • Operating humidity: 15 to 85 % (non condensing)C
  • Altitude: 2000 m
  • Power supply: 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator
  • Working voltage: 300 V AC rms or DC

General Specifications

  • Maximum conductor size: 19 mm diameter
  • Output connection: 4 mm safety connector
  • Output zero: Manual adjust via thumbwheel
  • Cable length: 1.5 meters
  • Operating temperature range: 0°C to +50°C
  • Storage temperature range (with battery removed): -20°C to +85°C
  • Operating humidity: 15% to 85% (non-condensing)
  • Weight: 250 g
  • EMC Standards: EN 61326: 1998 +A1, A2, and A3

Safety standards

  • BS EN 61010-1:2001
  • BS EN 61010-2-032:2002
  • BS EN 61010-031:2002
  • 300 V rms, Category III, Pollution Degree 2
  • Use of the probe on uninsulated conductors is limited to 300 V AC rms or DC and frequencies below 1 kHz

The i30 current clamp is based on Hall Effect technology for use in measurement of both DC and AC current. The i30 may be used in conjunction with multimeters, recorders and other suitable recording instruments for accurate non-intrusive current measurement.

ValueTronics New and Used Test Equipment, All Rights Reserved