LI-3P-4100 Com-Power LISN

Features:

• Frequency Range: 10 kHz to 10 MHz
• Current Ratings of 16, 32, 63 and 100 Amps
• Fully Compliant with MIL-STD-461D/E/F/G
• Remote Switching of Line Under Test
• Four-conductor, 50? , 50 μH, Network appropriate for 3Ø Delta and Wye Power Configurations

These LISNs provide the necessary measurement platform for performing power line conducted emissions compliance testing per MIL-STD-461, CE102, conducted emissions, radio frequency potential, power leads. The LISNs perform the following functions:

• provide a defined, stable power line impedance across its frequency range for the Equipment Under Test (EUT);
• isolate the EUT and measurement circuitfrom the power source, thereby minimizing its influence on the measurements; and,
• couplethedisturbancevoltagestothecoaxialmeasurementport, which connects to the measuring instrument.

The LISNs use air-core inductors to prevent saturation and permeability variation. The mounting plates are left unpainted in order to facilitate connection to earth ground in their installation, which is essential due to high leakage currents.

The side panels for each LISN are louvered for cooling purposes. The LI-3P-463 and LI-3P-4100 also include two internal cooling fans operated by a switch on the rear panel.

*The image is for reference only. See product specification for details.*