Additional Features:
- Frequency range: 9 kHz to 2 GHz
- Input Impedance: 50 Ohm
- Sweep Time: 10 ms-10s
- Resolution Bandwidth: 1 kHz-1 MHz
- Resolution Bandwidth Steps: 1/3/10
- Video Bandwidth: 100 Hz-10 kHz
- Video Bandwidth Steps: 1/10/100
- Maximum Single-Side-Band Noise: -70 dBc/Hz
- Maximum Safe AC Input: 20 dBm
- Maximum DC Input: 100 V
- Maximum Displayed Average Noise: -115 dBm
- Maximum Amplitude Uncertainty: 1.5 %
- Trigger Modes: Freerun,TTL
- Connector type (main signal): Type-N(f)
- Cal Output Connector Type: BNC(f)
The Anritsu MS610C spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Anritsu MS610C. The CRT displays received signal strength (y-axis) against frequency ( x-axis).
Manufacturer | Anritsu |
---|---|
Condition | Used |
Frequency | 2 GHz |
No manuals are currently available. Search all of our available manuals here.