Features:
- Probe bandwidth: 2 GHz
- Risetime (calculated, 10-90%): 175 psec
- High resistance (1MΩ) and low capacitance (1 pF) input for low loading
- Wide input dynamic range (±8V) and offset range ±12V for N2796A
- Built-in headlight for better visibility while probing
- Direct connection to AutoProbe interface (no power supply required)
- Provides full system bandwidth with InfiniiVision and Infiniium oscilloscopes with bandwidths up to 1 GHz
The N2796A is a low-cost, 2 GHz single-ended active probe with the AutoProbe interface (compatible with Agilent’s InfiniVision and Infiniium family of oscilloscopes). These probes integrate many of the characteristics needed for today’s general-purpose, high-speed probing - especially in digital system design, component design/characterization, and educational research applications. Its 1M? input resistance and extremely low input capacitance (1 pF) provide ultra low loading of the DUT. This, accompanied with superior signal fidelity, makes these probes useful for most of today’s digital logic voltages. And with their wide dynamic range (±8 V) and offset range (±12 V for N2796A), these probes can be used in a wide variety of applications.
For high signal integrity probing, the N2796A 2 GHz active probe is a perfect complements to Agilent’s 500 MHz – 600 MHz and 1 GHz bandwidth scopes, respectively.
The N2796A 2 GHz probe can also be used with Agilent’s 2 GHz or higher bandwidth Infiniium scope as a low cost alternative to InfiniiMax probes.
The N2796A is equipped with a pleasant white LED headlight to illuminate the circuit under test. The probes are powered directly by the InfiniiVision and Infiniium Autoprobe interface, eliminating the need for an additional power supply.
The image is a representation of selection. See specifications for product details.
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Frequency | 2 GHz |