N9913B Keysight Technologies Spectrum Analyzer
New
$18,868.00
Features:
- The standard model includes cable and antenna analysis (CAT)
- Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
- Carry one portable instrument that handles routine maintenance and in-depth troubleshooting
- Use the industry's lightest all-in-one analyzer at only 7.4 lb
- CAT and vector network analysis frequency: 30 kHz to 4 GHz (VNA via option)
- Spectrum analysis frequency: 9 kHz to 4 GHz (option)
- Measure all four S-parameters simultaneously with a 115 dB dynamic range (option)
- Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup (option)
- Perform over-the-air measurements for 5G NR and LTE (option)
- Capture elusive signals with 120 MHz gap-free, real-time bandwidth (option)
FieldFox Handheld Combination RF Analyzer (4 GHz)
The Keysight N9913B is a handheld combination RF analyzer. The standard model has a frequency range of 30 kHz to 4 GHz and has the following functionalities:
- Cable and antenna analysis
- Measurements: DTF (dB, linear, VSWR), return loss and DTF, return loss (dB), and 1-port cable loss
- Calibrations: Cal Ready, OSL, and response calibration
- Note: 2-port insertion loss is NOT included with the base model. If 2-port insertion loss is needed, order Option 210
- Note: The base analyzer does not have phase information. For the S11 or S21 phase, order Option 210
Manufacturer | Keysight Technologies |
---|---|
Condition | New |
Frequency | 4 GHz |
010 | Vector network analyzer time domain Requires 210, recommend 211 |
---|---|
030 | Remote control capability Requires an iOS device or an Android device |
208 | USB power sensor measurements versus frequency Requires 302 |
209 | Extended range transmission analysis (ERTA) Requires 233 and 210 1, recommend 307 |
210 | Vector network analyzer transmission/reflection |
211 | Vector network analyzer full 2-port S-parameters Requires 210 |
212 | 1-port mixed-mode S-parameters Requires 210 and 211 |
215 | TDR cable measurements |
233 | Spectrum analyzer |
235 | Pre-amplifier Requires 233 |
236 | Interference analyzer and spectrogram Requires 233 |
238 | Spectrum analyzer time gating Requires 233 |
302 | USB power sensor support |
307 | GPS receiver |
308 | Vector voltmeter Requires 210 and 211 for full VVM functionality |
309 | DC bias variable-voltage source Recommend N9910X-713 cable |
310 | Built-in power meter |
312 | Channel scanner Requires 233 |
330 | Pulse measurements Requires 302 and USB peak power sensor |
350 | Real-time spectrum analyzer (RTSA) Requires 233, recommend 235 |
351 | I/Q analyzer Requires 233 |
352 | Indoor and outdoor mapping Requires 233, 307, and at least one of 312, 360, 370, 371, 377 or 378. |
353 | IQ streaming Requires 233 and 351 |
355 | Analog demodulation Requires 233 |
356 | Noise figure measurements Requires 233, 235, 309 and accessory cable N9910X-713 |
358 | EMF measurements Requires 233. Also requires triaxial isotropic antenna. |
361 | EMI measurements Requires 233 |
370 | Over the air LTE FDD measurements Requires 233 and 307, recommend 235 |
371 | Over the air LTE TDD measurements Requires 233 and 307, recommend 235 |
378 | Over-the-air (OTA) 5G NR measurements Requires 233, B10, and 307, recommend 235; N991x/3xB models require external mixer for FR2 frequencies above 26.5 GHz |
B04 | Bandwidth, 40 MHz Requires 233. Recommend 350, 351 or PathWave VSA (formerly 89600 VSA) software |
B10 | Bandwidth, 100 MHz Requires 233. Recommend 350, 351, 378 or PathWave VSA (formerly 89600 VSA) software |
Looking for other manuals? Search all of our available manuals here.