SENTRY 10 PLUS QuadTech HiPot

Additional Features:

• AC HiPot Voltage 50 to 5000V, Output Current to 20mA
• Programmable Ground Continuity Check, 0.1 to 5ohms
• Programmable Ramp, Test, and Fall Times
• Fast Cutoff and Discharge of Device Under Test
• Programmable Hi/Lo Limits for Pass/Fail Testing
• Large LCD Display for Menu Programming and Test Results
• Internal Storage and Recall of 80 Test Setups
• Ground Fault Interrupt Shutdown for Operator Safety
• Front and Rear Panel Output Connections
• Front Panel Lockout Prevents Changes to the Test Setup
• Automatic Offset to Zero Out Stray Leakage Current
• Instruments Upgradeable, Sentry 10 to 20 to 30
• 3mA Current Limit per EN50191
• UL Listed and CE Marked

AC HiPot Applications:

• Production Testing of Appliances, Instruments and Information Technology Equipment in accordance with UL, IEC, TÜV and Other Standards such as EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111 and UL1950
• Electric Motor Safety Testing
• Lighting Fixtures Safety Testing

The Quad Tech Sentry 10 Plus AC HiPot Tester (CE Mark) performs AC dielectric withstand (HiPot) tests. The test voltage is programmable from 50V to 5kV AC with a resolution of 1V. The current range is 1µA to 20mA.

The Sentry 10 Plus instruments measure & display the output voltage directly at the output terminals. The instruments have both visual and audible failure indications, and after a failure the STOP switch must be pressed prior to another measurement.