6626A Agilent DC Power Supply

Additional Features:

Output ratings (2 outputs each)

• Low-range volts, amps 25W: 0 to 7 V, 0 to 15 mA
• Low-range volts, amps 50W: 0 to 16 V, 0 to 200 mA
• High range volts, amps 25W: 0 to 50 V, 0 to 500 mA
• High range volts, amps 50W: 0 to 50 V, 0 to 1 A or 0 to 16 V, 0 to 2 A

Programming accuracy at 25°C ±5°C (2 outputs each)

• Voltage 25W: 0.016% + 1.5 mV (low), 10 mV (high)
• Voltage 50W: 0.016% + 53 mV (low), 10 mV (high)
• Current 25W: 0.04% + 15 µA (low), 100 µA (high)
• Current 50W: 0.04% + 185 µA (low), 500 µA (high)

Ripple & noise (20 Hz to 20 MHz) 2 outputs each

• Peak-to-peak: 3 mV
• Voltage RMS: 500 µV
• Current RMS: 0.1 mA

The Agilent HP 6626A is one of our multiple-output, precision, GPIB system power supplies that has up to four linear noise power supply outputs combined with a built in GPIB interface. It has a 14 bit programming and read-back of current and voltage and dual ranging outputs providing greater precision and flexibility.

Two, three, or four isolated outputs are integrated into one package, conserving rack space and GPIB addresses. Most of the outputs also provide dual ranges, for more current at lower voltage levels. The outputs can be connected in parallel or series to further increase the flexibility that these products offer the system designer.

Programming is done using industry standard SCPI commands. Test system integration can be further simplified by using the VXIplug&play drivers. These power supplies help reduce test time with fast up and down programming, enhanced by an active downprogrammer which can sink the full rated current.