Sell Test Equipment

9100 WaveTek Multifunction Calibrator

Used
The 9100 is a Multifunction Calibrator from Wavetek. Engineers may need a sound level calibrator, radio frequency calibrator, power-meter calibrator, voltage-current calibrator, or another type for electronic test equipment calibration. Electronic calibrations are necessary for maintaining your equipment for general monitoring and testing purposes. Calibrators enable you to solve problems with your equipment on your own, on site.

Additional Features:

  • DC Voltage: Zero to ± 1050V
  • AC Voltage: Zero to 1050V
    • 10 Hz to 100 kHz
  • DC Current: Zero to ±20A (Up to 1000A via current coil)
  • AC Current: Zero to 20A (Up to 1000A via current coil)
    • 10 Hz-30 kHz
  • DC Power: 1mW to 20kW (Up to 1MW via current coil)
  • AC Power: 1mW/mVAR to 20kW/kVAR (Up to 1MW/MVAR via current coil)
  • Resistance: Zero to 400M Ohms
  • Conductance: 2.5nS to 2.5mS
  • Capacitance: 500pF to 40 mF
  • Frequency: 0.5 Hz to 10 MHz

The Wavetek 9100 is a multifunction calibrator with a breadth and depth of outputs never before available from a single calibration source. In addition to DC and AC voltage to 1050V, variable Resistance to 400MÙ and DC and AC current to 20A (1000A via the optional current coils), the Wavetek 9100 delivers continuously variable capacitance values to 40mF and conductance values to 2.5 milliSiemens. It also generates digitally synthesized and phase-locked sine, square, triangle, impulse and trapezoidal waveforms, variable amplitude pulses to 10 MHz, pulse widths to 2 seconds, and duty cycles between 0.05% and 99.95%.

ValueTronics New and Used Test Equipment, All Rights Reserved